The Bachelor’s Room - Diorama in 1/12 Scale

The Bachelor's Room, a quiet moment of silence. A calm retreat in 1:12 scale, from the noise beyond the walls surrounded by furnitures in late 70s Eastern European style. 

	🍾 Like the Bottles?🍾 The hollow bottles featured in the photos are availabe and ready to print not only in 1/12 Scale! They are avaiable also in: 1/6 Scale 1/10 Scale 🔗 And you can find them HERE!
If you're looking for more props to enhance your projects, be sure to check out those … 🏠 Wooden Crates    🔗 Awaiable for print HERE!

The cup, plate, glasses, and red basket serve as a demonstration of the precision of Bambu Lab printers and the power of vase mode. In this case, the focus isn’t on the models themselves, but rather on the printing mode, speed settings and the quality of the printer. Even a simple 🔴SOLID cylinder shaped model with simple geometry and few faces…can be printed out into a beautiful and accurate thin and 🔴HOLLOW miniature item.

Everything is made only with 0.4mm nozzle and standart textured PEI plate. Enjoy!

Instructions:

Attention! This is a scale model kit and may require tools, glue, and modeling skills for assembly. Not suitable for children under 6 years old due to small parts.

1. From The Bachelors Room - Room - A, first print plates A.01 Outer Walls, A.02 Inner Wall A and A.03 Inner Wall B. Assemble together with glue or double sided glue tape (thin one). Be careful the openings for the window to be aligned well. 
2. From The Bachelors Room - Floor and Window - B, print B.01 Floor, glue it in place. Then print B.02 Floor frame and glue it with few drops of CA glue to the walls. 
3. Window Assembly !Dont apply glue on the B.04 Glass Panels, they must fit inside B.03 Window Frames.  The window frames itself mount to the window opening from Step 1 with glue or duble sided tape. The B.05 Window Handle must be attached with a drop of glue to the frame. 

4. The Bachelors Room - Furnitures - C, dont need special instructions for assemble nothing can be assembled wrong, as far as they are notches and the parts fit only when aligned on them. 

    

Hi, I’m Nick, the person behind moDelnik.

With every project I create, I put in my heart, time, and energy to make sure you have a great printing experience. From airtight, ready to print  models with clean, optimized geometry to detailed project settings, everything is prepared so you can simply load, print, enjoy and have…Happy Printing & Modeling!

I never upload a project without first test printing it multiple times with different settings and model properties. Sometimes, a final object that uses just a few grams of filament may have cost me hundreds of grams, many hours of trial and error, and complete mess in the house. 😄

But I never regret it and I’ll keep doing it this way. Because, lowering the speed here, adjusting the seam there: make a huge difference. When I get a result that makes me happy, I feel confident it’ll make you happy too.

I share this with you so you know you can trust my modest portfolio. And please know: every like, idea, proposal, or honest rating means the world to me.

If you ever decide to support or boost my work, I’ll be honored, but it’s never expected or required.

Thanks for being here,

Happy Printing & Modeling by moDelnik!