Kuzan Marine One Piece TCG Deckbox
Print Profile(1)
Description
"The thing called "JUSTICE" changes its shape... Depending on where you stand." - Aokiji Kuzan
Yes~! We're entering the new era and soon with OP12 coming in, Aokiji Kuzan, when still was an Admiral of the Navy, will enter the fray!
He will need a deckbox, as he is seems to be a really fun new leader te play!
Sadly enough I had to pick the banned Sakazuki from OP05 for the photo's, since his colors already matched the deckbox I printer! :)
These deckboxes are made for:
-UltraPro magnetic 23pt or 35pt hard card case in front (I'd advice using a black border if you copy the use of colors I did)
- Use of full One Piece deck + DON!! cards, both double sleeved, whether it's with inner or outer sleeves.
- An extra hole for smaller dice or tokens in the main deck area on the bottom.
- Deck spacers of 1,5mm, 3mm and 6mm are added to make sure your cards don't flop around!
So, I included both the STL of the lid and the deckbox with their respective user presets saved in the .3mf file.
Those user presets worked the best result for me, but if you have the bambulab support material or use PETG for support top interface it'll work far better with less of a hassle to clear the support away from the lid.
On the deckbox preset there is topmost surface ironing, with the preset added to it, whereas the lid preset had all top surfaces ironing turned on. KEEP IN MIND that those presets are with S- PLA+, they might differ for Bambulab or other materials, so you might have to adjust those accordingly!
I used S- PLA+ Sky Blue and PLA+ Black
Keep in mind that the tolerances are pretty spot-on, so you might have to slide it a few times before it slides smoothly!
Settings:
Printed with 0.2 layer height for the deckbox.
3 walls, 10% gyroid infill.
Printed with 0.12 layer height for the sliding lid.
Again, 3 walls and 10% gyroid infill.
Ironing settings that I used for PLA+ from S-:
For this deckbox and lid only the topmost layer for the best results!
Ironing speed 60mms
Ironing flow 38%
Ironing line spacing 0.11mm
Ironing inset on 0.21mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)