Ninebot F2 Kickstand / wider foot contact / D12mm - Free 3D Print Model

Search models, users, collections, and posts

Emunem

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

P1P

X1E

X1 Carbon

H2D

H2C

H2S

H2D Pro

P2S

A1 mini

X2D

A2L

0.2mm layer, 3 walls, 18% infill

Designer

51 min

1 plate

4.5(4)

Open in Bambu Studio

Boost

115

Released

Description

This is a protective add-on designed for the kickstand arm of the Ninebot / Segway F2 electric scooter, but it also fits most scooters with a 12 mm diameter kickstand, including some Xiaomi models.

🔧 Functions:

Prevents damage to your car trunk floor when transporting the scooter
Offers a wider and more stable contact surface for the kickstand
Protects the paint on the kickstand arm from scratches and wear

This model is part of the Ninebot / Segway accessory family, designed to improve everyday usability and protect both your scooter and your vehicle.

🛠️ Fits:

Ninebot / Segway F2 /Plus/Pro
Any scooter with a 12 mm diameter kickstand (e.g., some Xiaomi models)

💡 Recommended material: TPU or PETG for durability and flexibility.

Update (2025/12/09): I’ve removed the horizontally-printed object from the build plate because there was feedback about dimensional inaccuracy.

Printing it lying down is only recommended if the filament is perfectly dry and the printer is well-calibrated. In all cases, it should have been printed standing. Many beginners may not yet be familiar with the finer details of printing, so those with more experience know how to orient an object horizontally and still print it correctly. :))

Download it, print it, and put it to good use! 😊

Boost Me (for free)

If you like my models and want to support me, please consider donating a boost! I will be grateful.

Happy printing!

trunk floor protector

Comment & Rating (6)

@thatguycarlos

Print Profile

0.2mm layer, 3 walls, 18% infill

Nice and simple. Protects all manner of floors.

The profile uploader has replied

@Emunem

Thank you very much for the review. The print turned out really well! :)

@user_4212483439

Print Profile

0.2mm layer, 3 walls, 18% infill

Maybe good for other Xiaomi model but not Xiaomi scooter 1s. I had to scrap off the wall to make it fit. Good design though.

The profile uploader has replied

@Emunem

A lot depends on the material. I’ve used Bambu, Overture, and Sunlu products and never had any issues with sizing. However, cheaper materials can shrink. This is not the model’s fault. 😉You could try scaling it up by 1% (101%) and print it again. If it works and you’re satisfied with the result, please consider updating your review (to 5 stars, for example 🤗). Thank you.In any case, I’ll keep your feedback in mind and add a note to the description stating that in case of shrinkage, increasing the scale by 1% may be necessary. 😉 Or try the option on the second tray. It works well even with the slightly ‘stringy’ filament, and due to the printing direction there is no shrinking.

(Edited)

@Ghosti2025

Print Profile

0.2mm layer, 3 walls, 18% infill

perfect!!! it doesn't get any better - this way I no longer have to constantly pick up my scooter from the soft ground!😅 very back-friendly!😉

Show original

@nikolaifallaha

Print Profile

0.2mm layer, 3 walls, 18% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.