Modular Paint Station
Print Profile(2)
Bill of Materials
Description
Since I sometimes want to paint 3D Printed models, I designed this modular spray booth.
The individual connectors are prepared for rod magnets (2x5 mm), but they also hold the segments firmly together without them.
Two fans fit on the back, which extract paint mist through internal filters.
The individual wall elements have a length of 18 cm, resulting in a base area of approximately 36 x 36 cm.
Thanks to the many different connectors, the wall elements can be assembled very individually. The square setup has proven effective for me.
!!! When printing the connectors, please refer to the second print profile !!!
A connection box to bring the fan control to the front is included and can be easily attached to the outside with double-sided tape.
A small turntable fits well into the spray booth.
I printed the wall elements in PETG Translucent, as I wanted to use it up and thus some light comes through the sides.
For illumination, LED strips could also be attached inside, as long as too much paint is not sprayed and thereby covers the LEDs.
Boost Me (for free)
If you like my model, I would appreciate a free boost. This helps me offset time and material costs and continue to make more models available for free in the future. Thank you for your support!
Documentation (2)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (139)