CRYSTAL PETG TRANSLUCENT Profile 0.4, 0.6, 0.8 noz
Print Profile(3)
Description
This is a PETG Transparent profile that turns out super crystal clear. The profile includes 0.4mm, 0.6mm, and 0.8mm nozzle profile. If you want maximum clarity, go for the 0.8mm nozzle since it will produce the least layer line due to a higher filament output producing a clearer model.
I printed several models with this profile and they turned out great. Remember to increase the flow rate and nozzle temperature. Turn your cooling fan off and set the layer height to 0.1mm and the line width to 0.5mm. Set the number of wall loops to 1, remove the top shell and bottom shell, set the infill density to 100%, and change the infill direction to 0° or 90. Set all speeds to 20mm/s.
Boost Me (for free)
If you enjoy my work, feel free to boost, like, or comment. Thank you for your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)