Irish Bar in A Can With Working LED

Irish Bar in A Can

Everyone at some point has wanted to own their own bar! Now you can ! This mini diorama of a traditional Irish pub inside a can of Guinness is the perfect addition to your home bar, shelf or desk!

Instructions

With this project you have too choices !

1. Print and enjoy! - You can simply hit print and your diorama will come out perfectly.
2. Go the extra mile! - This print is designed to fit inside a standard 500ml can of Guinness with a special LED cap bespoke for that exact can ! 

Going the extra mile!

Parts:

1 x 5mm LED in colour of your choice!

1 x 2032 button battery

Assembly

1. Press Print and carefully remove support ! Or get creative with you AMS and recolour!
2. Prep your can!
   1. Cut a window in the front of the can! this can be any size ! Use the pictures for reference!
   2. Cut the top off the can right where it widens!
      WARNING! - THE EDGES OF A DRINKS CAN ARE VERY SHARP! USE EXTRA EXTRA CAUTION!
3. Drop the diorama into the can !
4. Prep the cap!
   1. Get an LED and 2032 battery
   2. Insert the LED into the small hole in the cap with the long leg closest to the centre!
   3. Bend the shorter leg at a right angle!
   4. Flatten the short leg so that it lies flush with the plastic
   5. Pop your battery in , smooth side up!
   6. Slide under the grips to turn on your light and slide back to turn it off! 

Tips

• If your battery holder is tight, just slide it in and out a few times, it will loosen !
• Supports can be tricky, but make this print possible! Be very careful when removing especially around the taps
• Get creative! Use your AMS or paint to add life to this print!