Armor of God wood style coaster set

!! CLICK HERE FOR V2 - NEW AND IMPROVED WITH IMPROVED WOOD GRAIN!!

Please enjoy this coaster set of the Armor of God.  The holder is designed to hold all 6 coasters.  I hope you enjoy the print!

Huge thanks to PandaN for sharing a method of bringing wood style to your prints (link)!!!

CRITICAL Printing Info:

• WOOD STYLE SET [no ironing on this set :-)]

  • Do not need actual wood filament, this model used Bambu matte filaments
  • Be careful changing line heights.  Even though the model shows 0.8mm, I have used layer height modifiers to use 0.2mm for most of the prints.
  • If you increase the line height, you may lose a lot of the wood detail.
  • You can move the wood modifiers around to get different patterns
  • None of the wood coasters are ironed to keep the wood texture

   

• MATTE ARMOR OF GOD - IRONED
  • THIS METHOD USES IRONING TUNED FOR BAMBU LATTE MATTE FILAMENT!!!
  • Hopefully it will work well for all mattes, but be warned.

  • If you don't want to need ironing, I have a basic fast print set too

     

• NON-MATTE ARMOR OF GOD IRONED
  • THIS METHOD ALSO USES IRONING TUNED FOR BAMBU BASIC FILAMENT!!!
  • Hopefully it will work well for all filaments, but be warned.

  • If you don't want to need ironing, I have a basic fast print set too

     

• FAST NOT-IRONED
  • This profile is tuned for faster print speeds if you don't need the extra smooth finish
  • The infill level is also reduced a little so you can increase it if you want them a little heavie

Key Features

• Print includes both a holder for the coasters as well as an option cover for the set
• Dimensions: 100mm in diameter, 4.5mm thick
• 2 color prints
• Pre-sliced
• Some versions are are tuned with ironing - READ ABOVE!

Printing Details

I printed with Bambu basic filaments, but I am sure they will print well with many other colors or brands!  The prints look excellent when printed on the Diamond PEO plate.

Printing Tips:

• The coasters share the same colors which can be changed at your choosing.
  • To change colors, it's probably easier to change the filament drop downs rather than recoloring the model :-)
• If you wish to print on an A1 mini, the models should re-arrange and print with no issue! 
• Ensure your print surface is clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.

Happy printing and God bless!

Available on Patreon right now :-)!

If you enjoy my models and would like to sell them , please check out my Patreon for early releases and exclusive models! Become a member to get commercial licenses of my designs, or simply just to support my work.  Thanks and God bless!

Don't forget to check out my other designs https://makerworld.com/en/@jryan15