Big Shark fishing game - Free 3D Print Model

Search models, users, collections, and posts

LT3D Studio

Toys & Games>Board Games

IP Report

Print Profile(2)

All

P1P

H2S

H2C

P1S

H2D

X1 Carbon

X1E

A1 mini

P2S

H2D Pro

X2D

A2L

Shark game 0.2mm layer, 2 walls, 20% infill

Designer

5.7 h

3 plates

4.7(22)

Shark game monocromatico 0.2mm layer, 2 walls, 20% infill

Designer

5.6 h

2 plates

5.0(3)

Open in Bambu Studio

Boost

420

1087

569

392

Released

Description

Membership

licenza commerciale disponibile sul profilo

Join

Shark fishing game.

6 Sharks of different lengths, don't be fooled by the rings, the one who fishes the longest wins, or at your convenience.

The sharks stretch in sliding once caught, insert the tail holding the last end.

Stretch the fishing rod and mount the eyelets and the wire. I used common sewing thread, knotted to the whirlpool.

Working reel! To be assembled.

You can print as many sharks as you want, colors of your choice.

Monochrome profile available, if you can put the glue on the printing plate.

Interlocking pieces, it should not be necessary to attack.

Good fishing!

My prints had no problems, if you need support and if I can improve please ask. thank you

Boost Me (for free)

grazie del supporto

Comment & Rating (57)

@user_844041691

the shark print came out perfect... unfortunately I can't fit the various pieces of the fishing rod together

The designer has replied

Show original

@mattia.lt

They don't fit together or you can't figure out where they go

Show original

@mattia.lt

Two small eyelets go on the rod, and one slides onto the tip. If they don't stay, perhaps a dab of superglue. For the reel, I've included a photo where you can see the assembly

Show original

@mattia.lt

For the reel, use the larger U-shaped piece. Insert the long cylinder, close it with the round cap, and then fit the knob into the hole. Afterward, secure it onto the rod handle

Show original

@MedullaBello

the inner parts have fused and some fins do not unfold completely

The designer has replied

Show original

@mattia.lt

hello, some sharks have rings that don't come out, you only see them from the mouth, I did it because otherwise by looking inside the mouth you can see how many rings the shark is made of and consequently catch the longest one etc

Show original

@mattia.lt

it comes like this because the edge of the base is chamfered

Show original

@user_844041691

Print Profile

Shark game monocromatico 0.2mm layer, 2 walls, 20% infill

At the beginning, I had problems with assembling the fishing rod, but thanks to the designer's help, I solved it, and now it's ready to be given as a gift for Christmas

The profile uploader has replied

Show original

@mattia.lt

Thanks to you who noticed the problem and that we solved have fun and happy holidays

Show original

@Kiwiaussie

Print Profile

Shark game 0.2mm layer, 2 walls, 20% infill

Bed Adhesion Issue:tried to do this one 6 times, and even added a 20mm brim, and it ALMOST got to the top, but still knocked it and messed up the last layer.

The profile uploader has replied

@mattia.lt

I'm sorry, I'll try to reprint it and see if it falls. The adhesion problem may not depend on the project, given that it was successful for several people. Anyway, I'll check, thank you

Show original

@Kiwiaussie

could you possibly make a support that goes at the base of the handle on the rod to help hold it steady in the last few layers? just a ring to hold it on that comes off when removed from the plate. I have had 2 fail so far. tried turning up the heat on the bed, and now have added glue as well. hoping it works, as the sharks are done, and I want to pass on to my daughters support worker to test with her sons.

The designer has replied

@mattia.lt

hello, can you add a support from the slicer at the base of height one layer if you print from the app instead I will proceed with the modification

Show original

@Kiwiaussie

Replying to @mattia.lt :

I can only print from the app at this point. Thank you.

@Kiwiaussie

ok, I finally set up my laptop and loaded the software, and with a bit of help from AI added a 8mm brim. but it still did not work. feeling like giving up!! I wiped the plate with isopropyl alcohol and that didn’t help either. I don’t know what else I can do. maybe I did the brim wrong. was my first time to try and slice something.

@JufDarline

Print Profile

Shark game 0.2mm layer, 2 walls, 20% infill

Top design!

Show original

@just_a_person78

you can tell how long each one is by how many rings it has. you can look through the mouth and see the rings. people can cheat like this.

The designer has replied

@mattia.lt

I don't know if you printed it, but if you look closely I put "fake" rings, even if you see many rings a short fish can come out of the mouth evidently you didn't print it

(Edited)

Show original

@just_a_person78

Replying to @mattia.lt :

some have more rings than others, and those are longer, and yes, i printed it.

@mattia.lt

Replying to @just_a_person78 :

It looks like there are 3 rings in one, but only one comes out, you can't know for sure. it also depends on how you play

Show original

@user_1614290620

Print Profile

Shark game 0.2mm layer, 2 walls, 20% infill

printed easily

Show original

@user_1398653290

Boosted

Print Profile

Shark game 0.2mm layer, 2 walls, 20% infill

@user_4259119654

Print Profile

Shark game 0.2mm layer, 2 walls, 20% infill

The sharks printed ok however without support the rods kept unsticking from the base even after several tries and giving the plate a thorough cleaning. we had to print rods from someone else.

The profile uploader has replied

@mattia.lt

I'm sorry about your problem, no one else has had it. Have you tried reducing the print speed? To put on silent mode. What do you mean by printing from another? This other one has not had problems? I have printed several without problems

Show original

@Kiwiaussie

I have had this problem also. the print turns to spaghetti and the rod comes unstuck. tried turning bed temp up to 60 didn’t work. so added some glue, and it got even less height before turning to spaghetti. So thats three attempts. thinking I will have to find someone elses rod too. Only think I can think of to help would be a support ring on the first layer, but I am working from an ipad, so don’t have a proper slicer to add it myself.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Articulated Shark

mcgybeer

98.2 k

18.1 k

Articulated Whale Shark

Jopek Design

40 k

8.8 k

Mini Shark Articulated

FMCraft

34.9 k

6.6 k

GIF

flexi fishing game

是成龙奥（Globle）

4.7 k

4.1 k