Open Road HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 1.92mm

Filaments Used:
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #906b4b PLA BambuLab Matte Caramel  Transmission Distance: 1.5
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
This print uses 4 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #11 (1.04mm) swap to Black
    At layer #13 (1.12mm) swap to Caramel
    At layer #15 (1.28mm) swap to Jade White
    At layer #20 (1.68mm) swap to Sunflower Yellow for the rest.