Sunflower Magnet or Pin Tryzub, Seeds, or Blank

Edit 05/09/26: Added a new stl and profile for the back to use a 4mm clutch tie pin instead of a magnet. The little nub that is on most of these pins needs to be nipped off in order to make the pin fully round and flush to fit in the back. These pin backs can be used with any of the sunflower fronts.

This Sunflower with Tryzub magnet combines the Ukrainian National Flower with the symbol from the Ukrainian Coat of Arms. Also included are profiles for a blank face and a "seeded' face that enhances the sunflowers front texture. The models use an 0.2 nozzle and there are supports included, for a smoother and more precise magnet cavity, that can be removed easily with a small flat head screw driver. The colors used are Sunlu Pure Yellow PLA+, Polymaker PolyLite Brown PLA, Duramic Light Brown PLA, and Sunlu Grass Green PLA+

To assemble just put a couple drops of glue into the back leaves cavity, push the magnet in, put a drop of glue in the front face cavity, and push onto the magnet that's already inserted into the back leaves. My glue of choice is medium thickness CA glue (super glue).