Deck Daddy 2-in-1 Top Loader & Sleeve Holder

This is a major update form my original model I posted so I felt it needed a name!

2-in-1 Top Loader & Sleeve Holder is the original model, which if you prefer a slim design, it's still a solid option.

Based on suggestions from @Drexx89 I added a slot to pull top loaders underhanded, they come out super easily! @PrintingGremlin requested a top cover for travel, so I added top and front lids on hinges, secured via 5x2 magnets which seems to provide plenty of strength for this application.

Thanks for the suggestions, I think this came out great but will update further as the community sees ways to improve!

Assembly:

Magnets used - https://www.amazon.com/dp/B0DBVLTYDC?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

Based on how close the magnets are on the base model, I recommend gluing the magnets on the base first (as they will want to magnetize to each other) and then assign the correct direction the magnets for the lids.

The lids should only need a little nudge to fit into the outer hinges with PLA or PETG (PETG if you might leave it in a hot car!) I had good luck with PETG-CF, but things were a bit snugger, so bump up the size of the model just a little if you go that route.