Kelzan

cover

IMG_4862_285c6eb2-1559-4bd8-87d6-112ee284c6f7.jpeg

8x2mm Cutouts

plate_1.png

No Cutouts

plate_2.png

plate_1.webp

plate_2.webp

IMG_4861_33a2d417-b868-4524-8a78-e337658390c9.webp

<p>Two plates to choose from:</p><ol><li>With 8x2mm cutouts. Swap colors at layer 22 if you don't have AMS.</li><li>No cutouts, smiley only. Swap colors at layer 16 if you don't have AMS.</li></ol><p>The model is slightly thicker for plate 1 than for plate 2, since I wanted to make sure you couldn't see the magnet holes beneath through the top layer.</p><p>&nbsp;</p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Magnet holes are sized to friction fit without the need for glue. They're a bit snug, sometimes tapping them in with a small hammer helps. Magnets are fairly inexpensive and can be found easily online. I used these: </span><a target="_blank" href="https://www.amazon.com/gp/product/B0CDH1297R" rel="nofollow noopener"><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">https://www.amazon.com/gp/product/B0CDH1297R</span></a></p>

0.2mm layer, 2 walls, 15% infill

<h2>Groovy!</h2><p>Long before emojis, there was the smiley face.</p><p>&nbsp;</p><p>Two plates to choose from here. The first one has cutouts to insert 8x2mm magnets, in case you want to stick it to the side of your hippie van. The other plate is just a plain smiley face. The black color is raised, so AMS is not needed, if you swap colors at the right layer.</p><h3>Have a nice day!</h3>

Vintage 70s Smiley Face

ASIA

Print Profile(1)

Description

Groovy!

Have a nice day!

Comment & Rating (23)

License

Related Models