Print Profile(1)
Description
A 3-in-1 photo frame with an elegant, decorative frame.
It can be used in 3 ways:
1- Magnetic: by installing magnets in the 4 holes, it can be attached to a refrigerator or other metallic surfaces. Three variants (one per plate) are available with circular magnet holes of 3, 4, or 5 millimeters in diameter. The hole is 2mm deep, so magnets of 1, 1.5, or 2 millimeters thickness can be used (for a good hold, only 2 magnets are sufficient, at opposite corners; but for a better hold, 4 can be used, I recommend testing).
2- Wall-mounted: two elements with triangular holes are provided for hanging the frame on a nail. The two supports allow the frame to be hung both horizontally and vertically.
3- Freestanding: the small triangular piece serves as a support to allow the frame to stand, both horizontally and vertically. The piece fits into one of the two existing supports; it is also possible to attach the piece to the frame when not in use, to avoid losing it (as shown in the images).
The frame consists of 3 easily interlocking pieces: the frame, the base containing the photo and supports, and the small triangular support that allows the frame to stand.
Between the base and the frame, on one of the narrow sides, there is space to insert and remove photographs.
The frame opening is 7x8.5cm, but the photograph, to fit well and securely, must be trimmed to 7.4x9cm.
The total dimensions of the frame are 12.5x13.6cm.
The print file contains 4 plates:
1- The first contains the frame with print settings: 0.4mm nozzle, 0.12mm layer height;
2- The second contains the base with holes for circular magnets of 5mm diameter and 1, 1.5, or 2mm height. Print settings: 0.4mm nozzle, 0.20mm layer height;
3- The third contains the base with holes for circular magnets of 4mm diameter and 1, 1.5, or 2mm height. Print settings: 0.4mm nozzle, 0.20mm layer height;
4- The fourth contains the base with holes for circular magnets of 3mm diameter and 1, 1.5, or 2mm height. Print settings: 0.4mm nozzle, 0.20mm layer height;
I hope you like it. Happy printing! ^w^
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)