Replacement Part Pleated Blind Cord Guide Rotary Connector

My first self-uploaded part was supposed to be something that had already cost me a lot of nerves. These small caps on the pleated blind, where the thread is passed through, constantly break. Spare part procurement: Expensive and difficult. So my CAD skills had to be put to the test, and I dealt with redrawing the spare part While I was at it, I also got rid of that annoying edge that resulted from the original part not fitting perfectly into its counterpart After some optimizations, it now closes better than the original. Rock-solid and neat, even and not crooked with a consistently even gap that is only as large as needed for twisting together. The part is not a visible object, but if you're going to tackle it, at least do it right away So long story short, I hope I can still help someone with this thing and prevent the annoying procurement of expensive spare parts If you like the file, please leave a rating, a like, and a boost. I would be happy If you like the part, please leave a like and a boost and then have fun with the cute thing I have already been able to achieve sufficient results with a 0.2mm layer height. However, 0.08mm naturally looks even nicer I would recommend PLA, I tried it with PETG, it also works, but the layer adhesion is not yet suitable here due to the thin wall thickness. Since PLA works, I haven't tinkered further with the settings