Nightmare II. HueForge
Print Profile(1)
Description
Picture source Pinterest, autor not found.
Then used HueForge v0.9.1 to create the model.
Important info!
Slicing this model takes quite a while, about 3-4 minutes depending on the performance of your PC, so please be patient!
The Model is 150x200mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Base Thickness of 0.56mm. The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm.
Filaments Used:
PLA Elegoo + Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 3.6
PLA Elegoo + Gray Transmission Distance: 3
PLA Elegoo Basic White Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #15 (1.28mm) swap to Gray
At layer #20 (1.68mm) swap to White for the rest.
Share your prints and…
Boost Me (for free)
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)