JF-17 Thunder - Fighter Jet
Print Profile(3)
Description
<Board Game Miniature Collection>--<Warship Collection>--<Aircraft Collection>--<Vehicle-Tank Collection>--<Aerospace Collection>
Membership
JF-17 Thunder Fighter Jet
Simple assembly, refer to the main image for installation. Due to material shrinkage and printing accuracy, sanding and gluing may be necessary. Apply firm pressure.
Test printer: A1 mini, low-temperature stable build plate, Topology Bamboo PLA, 0.12 layer height, 2 walls, acceleration all 1000 or below, small parts speed 80.
The model uses 39 grams of material and takes 4 hours and 21 minutes.
Remember to clean the PEI build plate before printing to ensure adequate adhesion and that the material is dry.
Default skirt is added. If you are confident in your printer and material, you can turn it off, which I did.
For those who like my work, please help - follow, like, download, and boost.
Boost Me (for free)
Thank you very much for your support
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)