Popsicle Fidget (2 Sizes) with Stand (2 Styles)

This popsicle droops but never drips 🙌🏼…and I thought it wouldn't be complete without a stand/holder so I designed two different styles: the first holder is a popsicle 'mold' that holds three popsicle fidgets (supports needed); and the second one is a 'melted' popsicle holder that holds one popsicle fidget (no supports needed). I scaled this popsicle up and down and included files for the two I liked the best: 100% scale and 75% scale and included the two different holders at these scales too:)

Dimensions of Popsicle 75% scale: 1 3/4 in. X 3 1/4 in. x 1/2 in.

Dimensions of Popsicle 100% scale: 2 1/4 in. X 4 1/2 in. x 5/8 in.

Layer Height 0.2mm

15% Infill

Supports needed under the handle of the popsicle

PLA works great - I recommend PLA basic or PLA Silk (I also liked using PETG Translucent filament for the 3 Popsicle Mold Holders)

I have included a 3mf file with the following print profile:

Print Plate #1 (Large Popsicle Layered Fidget): 2 colors, supports under popsicle handle

Print Plate # 2 (Large ‘Melted’ Popsicle Holder): one color

Print Plate # 3 (Large 3 Popsicle Mold Holder): one color, supports added

Print Plate # 4  (Small Popsicle Layered Fidget): 2 colors, supports under popsicle handle

Print Plate # 5 (Small ‘Melted’ Popsicle Holder): one color

Print Plate # 6 (Small 3 Popsicle Mold Holder): one color, supports added

My designs are free for personal and non-commercial use. My designs are free for personal and non-commercial use. I offer a commercial license on Thangs. Here is a link if you'd like to check it out 👉 https://thangs.com/designer/3DPmom

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom 

Or…

Have fun printing!