LED strip / COB light holder - parametric

Update 2025 July 25th

Added a curved part as well, in case you want to go around a corner or shape it somehow and if the straight holder is not sufficient. It is parametric and can be customised through MakerWorld Customize-function. It can't be adjusted in every way, but I think it covers basic scenarios at least. It is done for a 90 degree bend. If using it with the straight holder, make sure you input the same width/thickness etc so they fit well together.

--------------------------------------

Recently bought a LED strip for our porch and there were only a few tiny weak clips included and I couldn't place it the way I wanted. Made a holder/list to better hold the LED strip. While I was at it I made it parametric (somewhat) so it can easily be adjusted both for my own sake and if someone else may need a similar thing. You can adjust the main parameters. I think it is mostly useful for those strips that are higher, so for example a COB type or outdoor type, but should with some tweaking fit normal thin ones also. Btw, the LED strip I used in this case is this one: Amazon link but of course, the point of doing it parametric is that it can be adjusted to fit many others.

I printed it with Bambu Lab PETG Translucent Clear to get some light come through also at the bottom and to have it not stand out so much, but can be printed in other materials of course. Also chose PETG since it is going to be outdoors. 

There is a wider top for easy installation to push the LED down into the holder which can also be adjusted, to some degree. For dimensions on the holder in the default print profile, look at the attached photo in the gallery.

Anyways, hope it comes to use!

/Peter