Horseradish Festival HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 137.5x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #156945 PLA BambuLab Basic Green  Transmission Distance: 2
    #e34d73 PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #ca9bb7 PLA BambuLab Matte Sakura Pink  Transmission Distance: 2.4
    #a4c727 PLA BambuLab Matte Apple Green  Transmission Distance: 1.2
    #56b7e6 PLA BambuLab Matte Sky Blue  Transmission Distance: 1.3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Blue Gray
    At layer #7 (0.64mm) swap to Green
    At layer #10 (0.88mm) swap to Hot Pink
    At layer #12 (1.04mm) swap to Sakura Pink
    At layer #14 (1.2mm) swap to Apple Green
    At layer #15 (1.28mm) swap to Sky Blue
    At layer #17 (1.44mm) swap to Jade White for the rest.