Ruiden RD Series Adjustable Power Supply Enclosure RD6006 RD6012 RD6018 RD6024 RD6030

Enclosure for the Ruiden RD series adjustable power supplies, designed for minimal size to suit desktop or mobile use, featuring a casing that includes only the power supply connector. The official manual indicates that the RD6006, RD6012, RD6018, RD6024, and RD6030 have identical three-dimensional dimensions, therefore this enclosure should be suitable for all (the demonstrated connector is an RD6018P).

Input utilizes an XT60H male connector and PD trigger input (maximum 20V/5A), with a switch to physically isolate the two inputs (empirical testing shows that without isolation, high-voltage DC input will directly damage the PD trigger module). However, note that due to residual voltage in the connector after power-off, after connecting a high-voltage DC input, wait at least 5 seconds in the center off position for the voltage to dissipate before switching to the PD input; otherwise, the residual high voltage may still damage the PD trigger module (learned from experience after damaging a second module…).

It is recommended to procure materials according to the BOM, primarily the PD trigger input module (ensure a 100% match with the image). This is the only model among many I've purchased that remains cool to the touch and provides a stable 20V/5A 100W output.

To achieve optimal surface quality, the print speed has been reduced. Restore to the default print speed if needed.