MILES MORALES - Free 3D Print Model

Search models, users, collections, and posts

asmahana

Art>Sculptures

IP Report

Print Profile(3)

All

P1S

X1E

P2S

H2S

A1 mini

H2C

P1P

H2D Pro

X1 Carbon

H2D

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

29 h

6 plates

5.0(27)

0.2mm layer, 2 walls, 8% infill

26.8 h

7 plates

4.9(14)

Multi color - AMS

43.6 h

7 plates

4.8(11)

Open in Bambu Studio

Boost

1475

3322

105

2.4 k

453

Released

Description

Content has been automatically translated.

Show original

Hand-painted Miles Morales

Spiderman

miles morales

Marvel

Comment & Rating (105)

@dihloubach

I increased the print resolution for a better result It took more work but was fun All printed in black PLA Premium and hand-painted with a brush and acrylic paint Thank you

Show original

@KR0NZ

Hi, it turned out great. If you could share your settings

Show original

@Dar3d

did you seal the paint after? or just leave it the acrylic paint?

@gonzagunner

Boosted

Awesome I painted it in the slicer and printed it using AMS

Show original

@Aracelis.mr

Hey it turned out amazing do you have the file

Show original

@D3D___

Please, could you publish it

Show original

@dylan3

file pls

@FBAIL

I smoothed the pedestal and the back with Durapoxy. It just wasn't possible to reduce this giant nape... it's clearly Miles Morales with Peter-PS4 skin. I also cut the base because it was going to take up too much space

(Edited)

Show original

@LabibQ

does this balance well or does it easily fall over with this base ?

@FBAIL

Replying to @LabibQ :

The piece of the base that remained is totally balancing, I was going to, but I didn't even need glue (the base on the MDF is loose and the hand on the base is merely fitted). The other joints, I attached with Durapoxy. Another thing I did was print the left arm and forearm (base support) with 0.12mm, 50% infill, in PETG and at a very low speed.

Show original

@jpnsilva

Boosted

Print Profile

Multi color - AMS

Tip for anyone who wants to print: add extra support to the leg area (right calf).

(Edited)

@travisaj33

Did you modify any settings for the base piece? I can’t get the base to print right. About 6-7 minutes in I get a lot of strings. I tried 5 different filaments and all fail. never had this issue with any other print. I printed the body parts with no issues. Any suggestions are appreciated.

@jpnsilva

Boosted

Replying to @travisaj33 :

Yes, the part has that design error. What I did was cut some lines from the top. I selected the part and moved it towards the print bed, thus eliminating two or three layers from the base. I sliced it again and saw that the base was now completely level.

(Edited)

@travisaj33

Replying to @jpnsilva :

Thank you!!! your tip helped and it printed perfect. have a great weekend!

@MR_Jay

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Fun to print model. Maybe get another base, or design your own, cuz that thing is BIG. The figure itself is really easy to print, and super high detail. Really easy to pain. I'll work it into a diorama at some point along with other prints.

The profile uploader has replied

@asmahana96

I am very happy you liked it

Show original

@KikoZ

can you show me that base miles stands on?

@MR_Jay

Boosted

Replying to @KikoZ :

Is just the base - but I cut the top off and used just that as a base so I don't have to print the rest. (Snip the top off...)

@YURILOL

I have cut the base to save time on this AMAZING print.

@Williammattos9

Edited *** sorry now I see there is already a profile in parts. Thank you

(Edited)

Show original

@user_4190563937

still needs painting, I made it in PETg. paying attention to the base would allow for less infill. since I made it for myself it's fine. the base alone is almost 500gr. since I am new to this 3d world I didn't pay attention. however the stl is very good congratulations to the modeler.

Show original

@utchie.utchie

is this the original size?

@user_4190563937

Replying to @utchie.utchie :

Yes

@niranjank

very cool

@JS1980

Boosted

Print Profile

Multi color - AMS

Freaking AMAZING! My wives SIL's son's are going to love them! Great work on this one. I'll boost ya!

@Matty_3D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

top 🔝 maybe I made it a little too big 😂

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.