Dr Stone - Senri Shioya Fanart Chibi

A charming chibi rendition of Asagiri Gen from Dr Stone

Asagiri Gen, a master manipulator wielding the arts of illusion, prioritizes self-interest and unwavering loyalty to the winning side.

This is my first attempt at creating a chibi character, I hope you enjoy it!

As before, the model is divided into multiple modules for multi-plate, multi-color printing. The eyes are separated into sclera and pupil components, requiring assembly. A paintable version is also provided for those who enjoy coloring. Use a fine-liner pen for the petrification markings on the face and the black lines on the clothing. For any loose parts upon printing, a small amount of adhesive is sufficient.

A separate model with a clasped-hands pose is included for alternative styling.

The assembled model stands approximately 11cm tall.

Designed with A1 mini multi-plate printing in mind, the paintable version requires only one plate. The plate arrangement has been meticulously tested and successfully printed, minimizing layer lines and imperfections for seamless printing. I used a 0.2mm layer height; however, those seeking higher detail can opt for 0.16mm or lower.

Important: Remember to pre-apply PVA glue to the printing plate to prevent part detachment during printing.

Lightly toast any whitened areas on colored prints after support removal using a lighter for a special effect.

Assembly video:

Recommended filaments for multi-color printing: Bambu Lab official filaments

White PLA lite (White 16103)

Black PLA lite (Black 16100)

Skin PETG HF (Cream White 33401)

Purple PLA Matte (Lilac Purple 11700)

Desert Yellow PLA Matte (Desert Yellow 11401)

Red (Other brands can be substituted)

Antique Bronze (Other brands can be substituted)