Makita DC18RC charger wallmount

Hi

This is a remix of a simple mount (SkubOpMakrel model) for the Makita DC18RC chargers, which I found excellent but not the best fit for my charger (pegs broke off). Original model upper and down peg centers were 127mm. I have adapted the location of the pegs to 126mm. Now it fits perfect for my chargers. I hope you can find my modification useful.

One model is with slotted pegs and the other is with full solid pegs.

As per the original instructions, just remove the four rubber feet and press the charger down onto the pegs on the mount, simple as that.
Can be mounted in all directions due to being press fit.

Dimensions:

• Width X: 172.5 mm
• Width Y: 138.5
• Total height: 16 mm
• Plate thickness: 4 mm
• Pegs height: 12 mm
• Pegs diameter: 8.5 mm

I have also another stronger DC18RC and DC18SD Makita charger wallmount models in my 3D models folder.

DC18RC: https://makerworld.com/en/models/1647443-makita-dc18rc-charger-wallmount#profileId-1741343

DC18SD: https://makerworld.com/en/models/1765649-makita-dc18sd-charger-wallmount#profileId-1878967

Please please rate my print profiles after printing. It is very helpful.
It determines the visibility of my models and the reward points awarded to creator.

Please don´t add your print profiles to my published models without my permission!

It will ensure that posted print profiles are up to standart under my models.
Thank you for understanding.