IKEA Shoe Horn Hanger (no AMS needed)

This remix accommodates regular/smaller command strips or any alternative low-profile adhesive for mounting. As a result, it has slightly smaller dimensions in all axes. I've also added a cute little shoe/shoehorn icon to the front (0.2mm layer height).

My print was made with a 0.4mm nozzle without the use of AMS, however I'd recommend a 0.2mm nozzle and/or AMS. Assembly requires pushing the “bulb” into the “hook” part, adhering a command strip to the back plate, and mounting to a smooth surface.

If you'd like to go ahead without AMS:

• ensure your layer height is 0.2mm
• group the “bulb” object with the “icon” objects (part 3, 4, 5, 6) and position where you'd like on the plate
• delete the “bulb” and “hook” objects
• Print the icon alone in the colour of your choice
• change filament and remove any purge lines from the plate - do NOT remove the icon from the plate
• undo the deletion of the “bulb” and “hook” objects (ctrl+z) in your slicer
• this time delete the icon and press Print