Bowden tube and CANbus / USB cable support clips

Search models, users, collections, and posts

Iconic FAB

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 40% infill

Designer

38 min

1 plate

5.0(9)

Open in Bambu Studio

Boost

116

Released

Description

Bowden tube and CANbus cable support clips.

Oftentimes switching from conventional setup of gazillion wires into cable chains is a bit tough as there are certain challenges with this.

Small things can make big difference.

Challenge this simple thing is addressing and solving more than effectively is how to organise bowden tube and CANbus / USB cable sagging and prevent it getting damaged on toolhead movements.

Dimensions

4mm OD, 2.5mm ID, 16mm of length
4mm OD, 2.5mm ID, 8mm of length

BOM (bill of materials)

Printed Parts

Printed parts 2 - 4 clips, depending on the size of your printer and therefore - bowden tube and cable length.

PRINT GUIDELINES

Here are print guidelines for you to follow in order to have decent success with printing parts:

3D PRINTING PROCESS	FDM (fused deposition modeling)
INFILL TYPE	Grid, Gyroid, Honeycomb, Triangle or Cubic
MATERIAL	Enclosed printer — ASA, ASA-CF, ABS, ABS+, ABS-CF
	Un-enclosed printer — PLA, PLA+ or PETG
INFILL PERCENTAGE	40% - 60%
LAYER HEIGHT	Recommended: 0.2mm
WALL COUNT	Recommended: 4
SOLID TOP/BOTTOM LAYERS	Recommended: 5
EXTRUSION WIDTH	Forced 0.4mm

Side notes to the print guidelines

A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 walls are perfectly fine for this model.