Po Xia PROMAX Magazine Edition

The three-way integrated part here has added support blocks to ensure a smooth support surface. Remember to remove them after printing.

This magazine version was printed in the color scheme of Unit-01, using the Aliz PETG metallic series. The main purple and black colors used were PETG Titanium Twilight Purple and Black Nickel. Titanium Sky Orange was used for the orange parts. Since there isn't a green metallic color yet, PLA Silk Green was used instead. The overall effect is quite good.
Model Upgrade Introduction
The difference between the magazine version and the rotary version lies in the way the magazine feeds ammo into the receiver. Therefore, only the middle receiver and the three-way integrated part need to be printed. The main hardware change is the trigger lever. A magazine version-specific pusher has been designed, which requires the later-updated cutting parts. The difference between the old and new versions is an additional hole. The new cutting parts can use the dedicated pusher, while the old version can still use the rotary version's pusher without issue.
For aesthetic purposes, the magazine holds 4 rounds, but it's compatible with both the Artisan Straight Dragon Claw and the printed version, mitigating the shortcoming of insufficient firepower.