Print Profile(2)
Bill of Materials
Description
Reducer for IBC containers with S60x6 thread.
Following the first project, I'm proposing a second similar part, but for 1/2" threads.
This part allows you to connect directly to an IBC tank with an S60x6 threaded valve using a 1/2" fitting.
With this, you can have fun connecting faucets and various fittings with a 1/2" male thread.
As with the previous project, be careful not to print it in PLA if you leave it exposed; in this case, print it in PETG (as I did) or, better yet, in ABS or ASA.
This model, like the previous one, is designed to have minimal friction on the thread, so it doesn't seal against it, therefore requiring a gasket.
The gasket must have an external diameter of 55 mm, an internal diameter of 44 mm, and a thickness (height) of 5 mm. This can be printed in TPU or made from a sheet of soft polyurethane or silicone, 4 to 6 mm thick.
I'm also including the project for the version printed in TPU, but even though I'm a fan of 3D printing, I recommend the one made from printed or extruded sheet.
As a recommendation, for good printing results, I recommend drying the material, cleaning the build plate, and then printing. Leveling.
Happy printing, everyone.
Looking forward to your comments.
This is the link for the 3/4" version.
https://makerworld.com/it/models/1383852-ibc-cap-s60x6-3_4_v2#profileId-1497028
Boost Me (for free)
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)