Matthijs_D

cover

WhatsApp Image 2025-07-14 at 19.54.46.jpeg

empty.jpeg

WhatsApp Image 2025-07-14 at 19.54.46 (1).jpeg

with bands 2.jpeg

plate_1.png

WhatsApp Image 2025-07-20 at 1.48.48 PM.jpeg

0.24mm layer, 3 walls, 30% infill

Ironing

No Ironing

plate_2.png

TheOgFam

Elastic Band Holder (1).jpg

Elastic Band Holder (2).jpg

Elastic Band Holder (3).jpg

Screenshot 2026-03-03 230726.png

Updated 2026-04-22<ul><li>Added a plate without ironing enabled at the request of users</li></ul>&nbsp;Print orientation changed to vertical, layer height reduced to 0.2mm with adaptive layer heights in the radius regions; yield a much cleaner end result<ul><li>50% reduction in filament cost</li><li>Walls remain at 3<ul><li>enabled embedding into infill</li><li>enabled thin wall detection</li></ul></li><li>Infill changed to 3D Honeycomb @ 5% (elastic bands are light, and this is just a static hook)</li><li>Seam position changed to “Back”</li><li>Ironing enabled for a smoother face</li></ul>

0.2mm layer, 3 walls, 5% infill

Simple resistance band holder that has five spots to hang bands onto. Has holes so it can be attached to a wall. Works well with the decathlon bands.

Print Profile(2)

Description

Comment & Rating (45)

License

Remixes (1)

Related Models

resistance band holder garage gym 5 bands