8 Headlight Old Car Desert Scene with frame

I liked the overall looks of this picture, got a kick out of the 8 headlights….

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #9d432c PLA BambuLab Basic Brown  Transmission Distance: 2
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    #cc7802 PLA BambuLab Basic Gold  Transmission Distance: 2.8
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 8 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.52mm) swap to Brown
    At layer #15 (0.72mm) swap to Pumpkin Orange
    At layer #19 (0.88mm) swap to Marine Blue
    At layer #21 (0.96mm) swap to Ice Blue
    At layer #24 (1.08mm) swap to Gold
    At layer #27 (1.2mm) swap to Yellow
    At layer #32 (1.4mm) swap to Jade White for the rest.