Slackline Leash Rings Padding by Petram Slacklines

Summary

This design is avaliable as a product here:
https://www.petramslack.com/shop-1/leash-ring-padding

Petram's design of a freestyle ring:
https://www.petramslack.com/shop-1/mollis-ring (padding included)
Petram's padding for standard double ring setup:
https://www.petramslack.com/shop-1/leash-ring-padding

This rubbery print is our developement to reduce effects of being hit by those metal rings we have to use to stay on the line. Special design absorb and distribute energy when needed. Padding can simply be pressed onto the rings keeping them from radling and securing you from the unfortunete strike during leashfall.

We recomend to use leash cover at the rings side knot (short piece of tube webbing). Padding is sold without rings. It works with all 10mm, 60mm inside diameter rings.

This is NOT a load bearing device. It was designed only to protect from being hit by the rings. Do not use it without proper leashrings.
Download a DIY or buy this padding.

If you own a 3d printer you can download the file and simply make your own piece.
For all others: You can just buy ready product.

Free Download

Yep, it is entirely free. You can leave some feedback and let me know if you made one for yourself. If you like my work, you can buy me a coffee :)

https://www.paypal.com/paypalme/PetramSlack/

Thank you. Download:

Note:
3D printing with TPU 40d can be a bit challenging and recuire proper printing setup. The print takes from 4 to 6 hours to print.

100% infill, no supports.

This design is a property of Petram Slacklines, please print it only for personal usage.