The Jibbitz Base to Rule Them All - Free 3D Print Model

Search models, users, collections, and posts

(3DSS) 3D Saguenay Solution

Fashion>Footwear

IP Report

Print Profile(2)

All

P1S

H2D Pro

X2D

H2D

P1P

P2S

A1 mini

H2C

H2S

X1 Carbon

X1E

A2L

0.2mm layer, 2 walls, 100% infill

Designer

11 min

1 plate

4.9(18)

For knitting: 0.2mm layer, 2 walls, 100% infill

16 min

1 plate

Open in Bambu Studio

Boost

289

968

1 k

519

Released

Description

I tried a bunch of jibbitz bases out there and didn’t like any of them, so I made The Jibbitz Base to Rule Them All.

This base is designed to fit Crocs snugly and hold your custom charms securely, without popping out every time you walk, crouch, or show off your fresh print to your neighbor.

It’s easy to print and easy to use:

PLA? Totally fine for casual use.
PETG? Even better for day-to-day wear and the sun.
TPU? If you plan on really putting your Crocs (and your charms) through some chaos, TPU will take the beating and bounce back.

Slap your custom top on it, pop it into your Crocs, and get moving. It’s time your Crocs had the jibbitz base they deserve.

Note: I only have tested for north American Crocs and have had one report of this model not fitting Russian Crocs properly. That being said it's a small print and the waste would be minimal.

Boost Me (for free)

If this saved you from floppy charms, give it a Boost so other Crocs enjoyers can find it too!

Comment & Rating (39)

@willathome

Thank you for this! I made a modified version where the top surface (bottom when printed) is wider than the insertion peg and has six holes around the circumference - my wife uses these to make crochet flowers to be added.

@willathome

Without the fiberwork in the way.

@BirdieFireheart

Replying to @willathome :

would be interested in this print profile as I am also a crocheter!!

@willathome

Replying to @BirdieFireheart :

I would love to, but the license for the original does not allow sharing of remixes.

@Ntygirl

Print Profile

0.2mm layer, 2 walls, 100% infill

perfect

The profile uploader has replied

@jimmy_lemieux

I’m glad you like it.

@Nexton_3D

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

quick print and fits perfect!

@user_2207628903

Boosted

These work perfect, they are very sturdy, now I just need a display stand as they don't fit the other ones out there.

@3dprinting4silv

Print Profile

0.2mm layer, 2 walls, 100% infill

worked great. nice and tight fit. printed great.

@3devprints

Print Profile

0.2mm layer, 2 walls, 100% infill

amazing, it’s a bit thick for using it on the middle holes in the crocs but going to try to sand it or cut it down a bit so it’s less noticeable. with socks, no problem but I live in FL lol added a poop bag holder to it for walks with my pups. still tweaking it a bit to be the perfect fit - almost there.

@WTFIDKBBQ

Boosted

I have used this in several different projects already. It really is the perfect size (at least for the US sized crocs). You may consider adjusting the license so that people can remix it to give you proper credit. I can't rate the print because it thinks that I didn't print this even though I have through other custom projects.

The designer has replied

@jimmy_lemieux

Great to hear that you used it and found it useful, I’ll change the license as the goal was always to remix it.

@user_1188711997

Boosted

Thank you for creating this!! I have been struggling with printing others' designs and either the gap is too big and they dig into the foot, or they don't fit into the hole in the croc, etc.

The designer has replied

@jimmy_lemieux

I’m glad it worked for you 🙂

@user_3993843296

what would be the best thing to attach custom jibits would you recommend hot glue or super glue?

The designer has replied

@jimmy_lemieux

if it’s 3D printed I’d try to combine this model to the the model. If it isn’t 3D printed, I’ve used CA glue(instant glue) with success.

@user_2998178496

Boosted

Great Design, Works Perfect.

License

This work is licensed under a Standard Digital File License – Community Use (SDFL‑C).

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.