Ray Wu LED Connector Caps
Print Profile(1)
Description
Boost Me (for free)
Please support the design and free publication of functional parts which return autonomy and control to the consumer. Every boost is greatly appreciated as it supports further time investment in creating these models!
Printable dust/weather caps for Ray Wu LED connectors - with and without captive straps.
Printing
- Print caps in a temperature resistant filament such as PETG, and/or a UV-stabilized filament with 6 walls.
- Print straps in TPU if you print the captive versions.
- Note: the TPU straps can only be fit onto the cables before splicing pigtails onto existing wiring. The straps will not readily stretch far enough to slide over existing connectors.
Usage
- The female side cap comes in both a captive strap version, as well as a non-captive version to simplify installation at the end of the chain.
- The male side cap only comes in a captive version (though it can be non-captive by simply not printing the strap) as the only reason for the start of your LEDs to not be connected is usually when you are storing something.
- These caps keep dust, debris, and most (but not all) water out. If you are concerned with corrosion under immersion/soaking conditions the use of dielectric grease on the metal contacts is recommended.
Boost Me (for free)
Please support design and free publication of functional parts which return autonomy and control to the consumer. Every boost is greatly appreciated as it supports further time investment in creating these models!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)