Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.4 h
1 plate
Open in Bambu Studio
Boost
213
484
22
5
287
179
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 119.28x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Red
At layer #15 (1.28mm) swap to Charcoal
At layer #17 (1.44mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (22)