Gas bottle holder

This holder allows you to fix a tensioning strap over eyelets after assembly and prevents the gas bottle from slipping with hook-and-loop fastener on the underside.

For mounting, you will need an M8 threaded rod, eyelets with an M8 internal thread, suitable washers (approx. 50mm), self-locking nuts, and a tensioning strap.

Shorten the threaded rod, screw on the eyelet, place the washer on the threaded rod, insert it from above through the large hole, place a nut on the threaded rod on the underside and secure it with a nut.

After that, the tensioning strap can be pulled through the eyelets and used to secure the gas bottle.

Hook-and-loop fastener can be attached to the underside to attach the holder to the opposite side, at the desired location on the opposite side, or attached via the small holes using screws.