Search models, users, collections, and posts
Angwatt F1/C1 Turn signal holder etc....
IP Report
GIF
GIF
Print Profile(2)
Angwatt F1 - 0.2mm layer, 8 walls, 98% infill
Designer
2.7 h
2 plates
only locking screw 0.2mm layer, 4 walls, 98% infill
Designer
18 min
1 plate
Open in Bambu Studio
Boost
0
7
0
0
9
0
Released
Description
Turn signal holder for Angwatt F1 and similar electric scooters.
The holder is suitable for mounting turn signals from various markets such as Temu, aliexpress, etc.
(FY-1820,.....)
Mounting above the fender of the Angwatt F1 electric scooter and similar ones. (shown in the photos)
Original screws from Angwatt can be used (or alternative ones in the same size)
I do not recommend using Pla, it is not suitable for such things,
my print is from Petg for its easy printing on all printers.
(if someone has the opportunity to print from better and more durable materials it is only a plus)
basic settings:
Nozzle 0.4
Layer 0.2
95-100% infill Gyroid (8 perimeters for the holder.)
95-100% infill Gyroid (4 perimeters for the rudder locking screw.)
Tree Supports turned on (already manually set in the profile)
recommendation:
when driving off-road, the holder can make dull sounds from impacts, so it is advisable to isolate it mainly at the rudder attachment point with rubber, neoprene tape, etc. to limit larger vibrations.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)