Chill Spongebob Squarepants Bic Lighter Sleeve

🍍 Who lives in a pineapple under the sea?

Always have a flame on hand and cover up your boring Bic lighter! This lighter sleeve features a real “sponge-like” texture thanks to fuzzy skin! There's a fin inside to keep your Bic secure, and my sleeves make a satisfying “POP!” when you remove the lighter to swap it for a fresh one!

👉 This model can be printed with a single AMS setup - even though it has five colors!
HERE'S HOW:

1. Load the yellow, black, pink, and white rolls in your AMS.
2. When sending the print job, be sure to map the light blue color to the same location that you have the white loaded.
3. During the print, and after the teeth have finished printing, manually swap the light blue roll with the white roll.
4. The print will continue normally even though the printer will show a “?” on the AMS location for the swapped roll.

The fuzzy texture is only applied to key parts of the model because of a part modifier. If you are experiencing trouble, try using my pre-sliced model via the Bambu Handy app.

👉 Remember: You can add multiple copies to decrease the cost per print while using the same amount of waste!

Please ensure your build plate is clean for this print. Let me know if you have any issues before leaving a review! :)

Be sure to follow me for future models!

👉 I'm Ready, I'm Ready, I'm Ready!