MRHQuickRelease MOLLE Clip, WolfgangsCitoNeckknife

The clip makes it easy to attach the knife to a hip bag, for example, and remove it just as quickly when you don't need it or when you're out in public.

U can mount it in two directions to wear it horizontal or vertical (depends on where you wear it).

Printing Notes:

• Resolution: 0.2
• Filling: 35%
• Walls: 4
• Bottom/Top: 2mm 
• Material: PLA is just fine for a neckknife
• Supports: yes, on buildplate only (for best results)
• connect the two halves with a piece of 1.75mm filament with ends pressed flat

I would be happy about a make with picture if you print it!

Differences between the remix and the original:

First of all, many thanks to @mussy for the original design.
I made a few adjustments so that the clip fits on my Wolfgang's cito Neckknife.

I also adapted the hole for connecting the two parts so that a piece of 1.75mm filament can be used as a connector. The two ends are simply heated and then pressed flat.