Cerber's Giant Zipper Pull

• Print 2 copies each of the “cerber zipper” and “dowel” parts
• Glue the two zipper halves together using the dowels for alignment

Luggage tag clasp (optional)

To add a plain cylindrical loop as pictured, print the “luggage tag clasp” and glue the parts together around the zipper loop hole.

Zipper pull clasp (optional)

You'll also need a small ½" brad nail for this.

1. Print the models in the “zipper pull clasp” folder.
2. Loop the “clasp” through the zipper loop hole.
3. Slide “clasp lock a” onto the channels along the opening of the “clasp” such that it slides all the way to the end and sits flush with the end. The hole should be facing in towards the middle of the clasp.
4. Glue the pointy end of the brad nail into the hole of “clasp lock a”
5. Feed the other end of the brad nail through the hole of a standard zipper pull
6. Slide “clasp lock b" onto the channels along the opening of the “clasp”, while feeding the end of the brad nail into the hole, optionally using glue.