Amazing Cable Clips - Free 3D Print Model

Search models, users, collections, and posts

JR_3D_Design

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2C

H2D

P2S

H2S

H2D Pro

P1P

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

3.2 h

4 plates

4.8(204)

Open in Bambu Studio

Boost

681

2448

327

4.2 k

3 k

Released

Description

Boost Me (for free)

If you like my model, please consider boosting this design. It's free for you, yet it makes a huge difference for me. Thanks for helping me keep creating!

I have a ton of various small cables. USB A to C, USB A to Micro, USB C to C, etc… These cables end up all knotted together in a drawer or storage container and I can never find the cable I'm looking for when I need it. If I do find the cable I need, it's all knotted together. I saw some similar cable organizers, but they were too hard to open. I decided to design my own version that opens more easily. Hope you find these useful.

Please Note:

1: I have printed dozens and dozens of these clips. I have modified the design to keep improving them. Yes, sometimes the hinge bonds together and the clip is not usable but doesn't happen often.

2: Make sure your printer is calibrated properly. The print in place design has very close tolerances.

3: If you use a heated build plate, it is recommended that you let the build plate and clips cool first before removing!

4: Gently rock the hinge back and forth to break the hinge free.

Comment & Rating (327)

@abhikumar98

I printed dozen of these but the hinge doesn’t close properly and on the first attempt to close it it breaks off the joint how can I fix this?

The designer has replied

@user_1328195714

@abhikumar98 Thank you for providing pictures. I'm not sure if it's over extrusion or speed, but from your pictures the layers look to be very bumpy. This is probably causing the hinge to bond together.

@abhikumar98

hmm got it, let me experiment a bit. that’s the exact problem

@user_2612970412

Print Profile

0.16mm layer, 2 walls, 15% infill

I love the clips. Good job! Thank you so much.

The profile uploader has replied

@user_1328195714

@user_2612970412 Thank you! Glad you love the clips!

@blchandl2

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Easy print. I used PETG because I have a lot of it and it works well on items that need to flex. Thanks for the model.

The profile uploader has replied

@user_1328195714

@blchandl2 Thank you!

@Cashlessraccoon

Print Profile

0.16mm layer, 2 walls, 15% infill

These are amazing! Printed 13 bigger clips and 1 small. Plan to print up more smaller ones soon. My charging cables are perfectly organized now.

The profile uploader has replied

@user_1328195714

@Cashlessraccoon Glad to hear you are finding them useful.

@rskrazvan

Print Profile

0.16mm layer, 2 walls, 15% infill

thanks! the fit snaps are very good💪

The profile uploader has replied

@user_1328195714

@rskrazvan Thank you!

@user_4136578098

Print Profile

0.16mm layer, 2 walls, 15% infill

A bit hard to open.

The profile uploader has replied

@user_1328195714

@user_4136578098 If you are using the Profile there are other plates with different clamping strengths

@user_4136578098

Replying to @user_1328195714 :

okay…

@user_985042756

Replying to @user_1328195714 :

Have these been removed? I only get .3mf with one plate and the smaller size I printed earlier (and now would need more) does not exist there. Smaller is ~same size as the bigger used to be with "male-female" clip (gray in the pic). I used the tightest option previously. I tried resizing the smaller clip, 50%, 60%, 70%, 75% with increased height, but no. Either clips don't attach at all, or then clip breaks (black clips), despite now printed in PETG instead of PLA. No issues with 100% size (beige clip, PETG as well). And I don't have the old .3mf saved...

(Edited)

@user_2958974219

Print Profile

0.16mm layer, 2 walls, 15% infill

No problems with the print the profile is correct

The profile uploader has replied

Show original

@user_1328195714

Thank you

@Batzko1986

Print Profile

0.16mm layer, 2 walls, 15% infill

Toll

The profile uploader has replied

@user_1328195714

Thank you!

@user_1835530735

Print Profile

0.16mm layer, 2 walls, 15% infill

All default settings were utilized. Upon attempting to use them, all three clips separated near the hinge and did not function as intended.

@xdXDanielSunXbx

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@user_1328195714

@xdXDanielSunXbx Thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Cable clips (A1, A1 mini without AMS)

Michal

41.8 k

8.9 k

PTFE / Cable Clip Bambu Lab A1 (mini) without AMS

schiko

46.2 k

7.2 k

Cable Organizer

Singh Design

51.3 k

12.1 k

Cable Clips

3Dthing

5.3 k

825