101ST Airborne

Project: 101ST Airborne.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 179.33x180mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

Filaments Used:
    PLA Bambu Basic Black  Transmission Distance: 0.1
    PLA Bambu Matte Scarlet Red  Transmission Distance: 2
    PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.5
    PLA Bambu Basic Jade White  Transmission Distance: 6.3
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (0.64mm) swap to Scarlet Red
    At layer #18 (0.84mm) swap to Sunflower Yellow
    At layer #30 (1.32mm) swap to Jade White for the rest.