Red 1940 Ford Pickup Streetrod HueForge with frame

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 114.29x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.56mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.52mm) swap to Red
    At layer #16 (0.76mm) swap to Marine Blue
    At layer #18 (0.84mm) swap to Yellow
    At layer #24 (1.08mm) swap to Ice Blue
    At layer #32 (1.4mm) swap to Jade White for the rest.