Xiaomi 12 T perfect fit TPU case

Perfectly fitting case for Xiaomi 12 T. There are two versions in the profile. One with a hole for the buttons and the second variant also has button protection on the side edge.

The design is shaped so that the lower part protects the camera lens with an overlap of 0.3 mm and the upper edge protects the display from scratches and has an overlap of 0.2 mm. The design follows the curves of the phone as accurately as possible. In the model with button protection, a sufficient tolerance of 0.2 mm from the buttons is embedded.

The printing profile is for generic TPU. The lower part is lightened with a hexagon pattern for better cooling, while it is better to hold in the hand. Only the most necessary supports are painted in the profile, which can be removed with a sharp knife. I created the rounding design to minimize printing problems. The profile is created for high-quality printing with a layer of 0.16 mm and for the upper part I used 0.12 mm, thereby saving printing time.

Please note that each TPU material behaves differently and any profile changes should be taken into account. Dimensions are accurate with minimal tolerances so that the case fits well.

Enjoy, remix with mentions me.