Janemba from dragon ball - hueforge - Free 3D Print Model

Search models, users, collections, and posts

Altf4-Formation

Art>2D Art

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.04mm layer, 1 walls, 100% infill

Designer

6.9 h

1 plate

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

Description

My photos are indeed those of the printed model and not of the original image

-------------------------------------------------------------------------------------------------------------------------------------------------------

Commercial license and exclusive models on Ko-fi!

Thanks!

-------------------------------------------------------------------------------------------------------------------------------------------------------

Hueforge of janemba from Dragon ball by artist K-Suwabe
The photos shows the result in 141.52x200mm and a nozzle of 0.4

Boost Me (for free)

Thanks for your boost!

You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA

Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 141.52x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.36mm and the Actual Thickness is 2.28mm

Filaments Used:
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
    #00358e PLA BambuLab Basic Blue Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #10 (0.52mm) swap to BambuLab Basic Red
    At layer #20 (0.92mm) swap to BambuLab Basic Jade White
    At layer #21 (0.96mm) swap to BambuLab Basic Blue
    At layer #37 (1.6mm) swap to BambuLab Basic Red
    At layer #39 (1.68mm) swap to BambuLab Basic Jade White
    At layer #52 (2.2mm) swap to BambuLab Basic Yellow for the rest.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Don't forget your grandma's advice: Always have a clean plate, a dry and calibrate filament, and make an offering to the god of 3D printing from time to time.

janemba

HUEFORGE

dragon ball

Comment & Rating (0)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.