NFDY Designs

cover

IMG_0330.jpeg

IMG_0325.jpeg

IMG_0326.jpeg

IMG_0327.jpeg

IMG_0328.jpeg

IMG_0329.jpeg

IMG_0331.jpeg

IMG_0332.jpeg

plate_1.png

plate_2.png

2025-07-10_c38c3b13e82a2.jpeg

0.2mm layer, 3 walls, 15% infill

IMG_0337.jpeg

IMG_0338.jpeg

IMG_0339.jpeg

50% smaller for A1 mini users, and overall faster print! Hope you enjoy Chooms

Cyberpunk 2077 Kiroshi Optic: 50% Reduced Scale

IMG_0998.jpeg

IMG_0997.jpeg

IMG_0994.jpeg

IMG_0995.jpeg

IMG_0996.jpeg

Inspired by a review that convinced me the base could be better. I feel this one is more fitting of the model. This base is for the 50% size model, but you can easily make some adjustments in the slicer to make it large enough for the full size model. Hope you all enjoy!

Base V2

IMG_0340.jpeg

IMG_0341.jpeg

IMG_0342.jpeg

Who doesn&#39;t love a good crossover event? NFDY Sure does! We proudly present a special edition of our Kiroshi Optic model. Now featuring a Sharingan Iris, and special edition base!

Special Edition crossover CyberpunkxNaruto Sharingan Kiroshi

plate_3.png

plate_4.png

plate_5.png

QUIET

20260715_203355.jpg

20260715_203404.jpg

20260715_203411.jpg

Fully Colored Base Version (AMS Ready)This print profile is based on the Base Version of the model. I spent time fully painting the model directly in the slicer to closely match the hand-painted look shown in the original creator&#39;s images. Now you can print it easily in multi-color without having to paint it by hand after printing!<h4>Print Settings &amp; Quality</h4><ul><li>Layer Height: Printed at 0.08mm for maximum detail and the cleanest surface finish possible.</li></ul><h4>Important Tips for Supports &amp; Printing</h4><ul><li>The Eyes (Requires Attention):<ul><li>Lower part of the eye: I manually placed supports in specific areas. If you run into any issues, feel free to add or remove supports as needed in your slicer.</li><li>Upper part of the eye: This is set to Auto Supports, which creates a lot of support structure. They can be a bit tricky and difficult to remove.</li><li>Tip: If the supports leave some rough marks, you can easily clean them up and bring the design details back out using a nail sander/file, a Dremel, or fine sandpaper.</li></ul></li><li>The Cables:<ul><li>These are set to Auto Supports, but the slicer currently does not generate supports for them. Please be careful here, as they print with very extreme overhangs.</li></ul></li><li>Recommended Build Plate:<ul><li>To prevent adhesion issues or problems with the cylindrical supports and the thick blue cables, I highly recommend using the Cool Plate or the Cool Plate SuperTack Pro (or another high-adhesion plate). This will help you avoid support failures and ensure a smooth print.</li></ul></li></ul>Enjoy the print! If you like the result, please leave a rating and share your makes!

Base Version but Colored AMS 0.08mm

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

CHOOMS! Whether you&#39;re going out for a night on the town in Night City, or storming Arasaka tower. You better have the best optics money can by, and nothing tops Kiroshi. Get to your favorite ripperdoc and get yourself a set today!This model is for all my Cyberpunk 2077 fans. As always . NFDY Designs hopes you enjoy the model. Like, ratings and boosts are always appreciated. (If it does well, we&#39;ll make a few more versions! Suggestions?) Don&#39;t forget to show us your builds, and let us what you think!

Cyberpunk 2077 Kiroshi Optics

ASIA

Print Profile(5)

Description

Comment & Rating (22)

License

Related Models