Print Profile(2)
Description
Membership
Interested in selling physical prints of my models? Subscribe to one of my tiers!
Boost Me (for free)
Your boost is my motivation to create more free models. Please consider boosting if you can
- Minimal supports
- Print in Place
- 2 size options, freely scalable
I set 4 walls and 0% infill to save material and time
If you want it heavier, you can increase the infill rate, which defaults to 15% in the slicer
❤️ Secrets to successful printing ❤️
- Thoroughly clean the build plate with hot water and soap
- Use glue or glue stick
- Run the calibration program in the software, and run the printer's built-in calibration program
- Regularly maintain the printer, clean, replenish lubricant, replace belts, etc
- Motion mode is not recommended, high-speed print head is not recommended
- Turn off time-lapse photography
- When removing supports, it is recommended to use pliers to break them from the middle first
- Download .3mf files for printing, not .stl files
❤️ My other designs ❤️
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (49)