【Mercedes AMG】Mercedes-Benz - AMG GT Black Series F1 Safety Car Race Car

【Special Notes for F1 Models】

1. The author has conducted structural printing tests on all models before release. However, the F1 model has a complex structure and requires high printing precision. Newcomers are advised to use the parameters in the slicer directly for printing and not to adjust them arbitrarily to avoid printing failures; experienced players may ignore this reminder.
2. The printing effect of the model is affected by various objective factors such as equipment, filament, and environment. If you encounter problems during printing, you are welcome to contact me through comments or private messages, and I will assist in troubleshooting. Creating is not easy. Please communicate before evaluating and do not give low scores at will; malicious negative reviews will result in being blocked. Thank you for your understanding!
3. All models from the author are tested based on Bambu Lab printers, and the configuration files use Bambu Lab's official slicing software. If you are using other brands of printers, it is recommended to adjust the parameters according to your own equipment's slicing software and preview before printing. Thank you for your cooperation!

4. As multi-color printing becomes the trend, the model is sliced with the H2C multi-nozzle printer by default. For other models, please refer to your own model for slicing preview to check the time and filament consumption.
5. Thank you again for the recognition and support from fellow enthusiasts. I hope to receive your likes and boosts. In 2026, let's unlock more F1 models together!

【Read Before Printing!!! Warm Tips】

It is strongly recommended to print the single-color configuration first before printing the multi-color configuration to test the model structure and slicing effect (Cost of single-color model printing: 64 scale 15g filament, 2 hours. 43 scale 50g filament, 3 hours). After being satisfied with the model's appearance, articulated structure, and slicing effect, then print the multi-color version. Thank you.

Note: Before printing the multi-color configuration file, you can enlarge it according to the complexity of the paint scheme. Preview in the slicing software to check the details and ensure printability.

---------⇪3D Printing Instructions-----------⇩ Product Introduction--------------

43 and 64 scale monochrome version: [Mercedes AMG] Mercedes GT Black Series F1 Safety Car 64 and 43 scale blank model from SAMPAN Jingjie Reproduction MakerWorld: Free 3D Model Download

Mercedes AMG GT Black Series F1 Safety Car: The Track King's Safety Mission

The Mercedes AMG GT Black Series F1 Safety Car is the perfect combination of performance and safety. It is not only the "safety guardian" on the track but also a platform for showcasing Mercedes-AMG's technological prowess.

Its revolutionary lighting system design, powerful 730 horsepower, and race car-like handling make it one of the most iconic safety cars in F1 history, continuing to write the legendary story of Mercedes-AMG and F1.

Model Description

- wheels are movable, no glue required for assembly

- All wheel hubs for 64 scale cars under this account are replaceable. Browse the homepage and download your favorite wheel hub styles

Dimensions
- 1/64 scale

- 1/43 scale: simply scale up by 150%
- Slicing file, set for minimum printer size. You can adjust the number of models printed at one time according to your printer size to save time and filament

FDM Printing Settings

- The physical model was printed using an A1 mini with a 0.4mm nozzle, 0.12mm layer height, and official PLA. Using equipment, parameters, and filament with higher specifications will yield better results (if assembly is too tight or too loose, it can be compensated by adjusting the XY outer contour dimensions of the components, or by using sanding tools and 409 glue for processing and connection).
- Infill density: 15%. To increase the model's heft, the infill density can be adjusted to 100%.
- Supports: A combination of normal and tree supports was used

- Various painted versions will be released later. Follow the account to get the latest updates as soon as they are available.

- You can also adjust the parameters based on your own printing experience.

Support Removal Instructions

- The model is small, and supports have been added in key areas. Support removal requires the use of flush cutters and tweezers. Attempting to break them off by hand will likely result in structural breakage, especially for the rearview mirrors and rear wing sections.

- Tip: To ensure successful removal of supports for multi-color models and avoid breakage. You can first print a monochrome model for practice removal to understand the model and support structure, then remove the supports from the multi-color model (if there is breakage, 409 glue can be used for connection).

Monochrome Painting Reference (Printed with white filament)

- Sanding: (Optional) Sand in the order of 400-600-800 grit

- Coloring: Paint with acrylic colors using a brush (for issues with edge layer texture bleeding, you can first apply the main color over a large area, then paint the edges).

- Polishing: Polish with a soft cloth to make the acrylic paint shine.

Assembly Instructions

- For long-term stability, the wheels require appropriate force for installation, and the first rotation will be quite stiff. After a few uses, they will become more flexible. See GIF demonstration for wheel installation.

- For easy installation of wheel calipers, a dedicated wheel caliper installation tool has been designed and produced, Link: 64 Scale Wheel Caliper Installation Tool from SAMPAN Jingjie Reproduction - MakerWorld

Visit the author's homepage to see all vehicle models, welcome to like and follow!

Hope to see more friends share your printing photos, I'm curious what kind of works you will print!

We will continue to release various high-precision 3D printed vehicles, thank you for your attention and support!

China site:https://makerworld.com.cn/zh/@sampan1120
International site:https://makerworld.com/zh/@sampan1120