Buggy Monster Track - Free 3D Print Model

Search models, users, collections, and posts

Pe'eros

Hobby & DIY>Vehicles

IP Report

GIF

Print Profile(1)

All

A1 mini

X1 Carbon

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

P1S

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

9.2 h

6 plates

5.0(6)

Open in Bambu Studio

Boost

116

101

Released

Description

Suspension-Equipped Wheeled Chassis with Modular Brick-Style Interface

This custom 3D-printed chassis combines a spring-loaded suspension and four smooth-rolling wheels, all driven by a pair of elastic bands that deliver just the right amount of bounce and damping.
The top platform is studded in a universal “interlocking building brick” pattern, allowing you to securely clip on any compatible brick-style car body or decorative elements. Alternatively, you can swap to the 3D-printed model attached in the file.
Thanks to the versatile studded surface and elastic-band suspension, you get both reliable handling and endless customization possibilities.

If you choose to build your own brick-style car, please share a photo of your model.

All wheel axles are made from short segments of filament .
if the filament axis slide back out of the wheel hub, gently heat the tip of a flat-head screwdriver and press it against the end of the filament to melt and flare it slightly for a secure fit, or alternatively apply a tiny drop of fast-setting super glue.

Boost Me (for free)

Comment & Rating (22)

@Luckyfire86

Awesome model, I used iron nails and hair bands for the moving parts. Also customized the wing to include the names of the kids I'm gifting them to.

The designer has replied

@Luckyfire86

one suggestion, the windows aren't clearly outspoken. maybe do a little indent to show where the windows are.

@user_919227251

hi man, awesome prints! thanks for sharing, i hope your kids will have fun with it

@user_919227251

Replying to @Luckyfire86 :

that is a good idea... thanks 🙏

@Jurdis

Print Profile

0.2mm layer, 2 walls, 15% infill

This is a great model, and the suspension is nicely done. I used cocktail sticks for the joints. The other mirror didn’t last long, but it doesn’t take away from the fun 😀 Thank you so much!

The profile uploader has replied

@user_919227251

That’s awesome! thank you so much for sharing!

(Edited)

@DadBodLab

Print Profile

0.2mm layer, 2 walls, 15% infill

this thing is fantastic I had to print one for my other boy asap and he’s loving building his own. very easy to assemble, I used the rubber bands from the makers kit and doubled up per axle, works great. thanks for this awesome design, not my first print of yours, won’t be my last.

The profile uploader has replied

@user_919227251

Great prints, thank you man! Glad you enjoyed it

(Edited)

@steinbrecherhua

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@user_919227251

Hi, great print, but you put the rubbers band in the wrong way...

@steinbrecherhua

Boosted

Replying to @user_919227251 :

ohhh, thank you very much 👌🏻

Show original

@Brills

Print Profile

0.2mm layer, 2 walls, 15% infill

Amazing, i'm working on a 200% scale version, made 3 so far, very happy, fun for kids

The profile uploader has replied

@user_919227251

Thank you very much 🙏🏻, that sounds great, pls upload a print profile if you can...

@Brills

Replying to @user_919227251 :

I'm having trouble with the studded top assembly, i'd like to add some studs on the side too, did you create it with a mesh I could use? or find a parametric brick plate generator?

@user_919227251

Replying to @Brills :

hi i can send you a step file if you give me your email...

@user_1953064654

Print Profile

0.2mm layer, 2 walls, 15% infill

Sweet print. Nothing was mentioned about how to set up the suspension. I ended up using rivets and cut the head off. They fitting perfectly and snug. The idea of the suspension is clever because it relies on the rubber bands not the material. Other suspension using the PLA for e.g. wear out over time and break. Also the shell comes off easy so will need to use a bit of glue but not too much as the whole idea of the design is to be able to change the top. Very cool design and I have loved building it. Plan on making a few for some little friends I have. :)

The profile uploader has replied

@user_919227251

Thank you very much, I’m glad you like the model. The axes are supposed to be made from pieces of 1.75 mm filament, but your solution is cool too

@user_1953064654

Replying to @user_919227251 :

Oh yes, I re read the original post and missed that the first time through. I'm building another one using different colors and will try using filament instead.

@madrandomize

Boosted

Here is also my second boost, superb model ,tons of fun and durable.

The designer has replied

@user_919227251

thank you my dear friend for 2 boosting! it is very helpful... I'm glad you enjoy it 🙏

@madrandomize

Boosted

perfect !

@user_410439086

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.