Minimalist Flip7 & Vengeance Box for Sleeved Cards - Free 3D Print Model

Search models, users, collections, and posts

PandaruExpress

Toys & Games>Board Games

IP Report

Print Profile(1)

All

P1S

H2C

P1P

H2D Pro

X1E

H2S

X1 Carbon

H2D

P2S

X2D

A2L

0.2mm layer, 3 walls, 30% infill

Designer

24.6 h

18 plates

5.0(15)

Open in Bambu Studio

Boost

154

282

204

Released

Description

Simple replacement case for the “The OP” version of Flip 7 & Flip 7 Vengeance that holds sleeved cards. A tabbed slot securely holds the manual in the lid and displays the name of the game. Note that there are 2 versions of each lid, the original is calibrated for x1c and is a little snug. The 2nd file labelled “looser” is if you want a looser one. Its slightly bigger and slightly shorter so there's less friction.

By request, there are now support for 3 sizes, one for penny sleeves, one for gamegenic sleeves and one for unsleeved cards. Interior card well sizes are as follows, please measure your sleeves to get the one that fits the best. For unsleeved, there are at least 3 slightly different sizes of cards but the unsleeved should fit them all:
Penny: 95 x 68

Gamegenic: 98 x 68

Unsleeved: 90 x 65

7/17/25: The dimensions have been updated to accommodate standard penny sleeve sizes (65mmx95mm).

12/5/25: Added an XL version that is 3mm longer to accommodate certain gamegenic sleeve sizes (68mmx98mm)

2/7/26: Renamed the files to be more clear, penny sized vs the larger gamegenic sized one.

2/19/26: Added lids for the Vengeance version, and added box and lid sizes for unsleeved cards. Please let me know if you run into any issues or need these to be tweaked.

3/9/26: Fixed some sizing issues with the looser vengeance box lids. Added double boxes as requested that can hold both games. Only included the looser lid as it gets unwieldy with the deeper normal lid. If this doesn't work let me know and I can try and mock up the deeper lids as well.

3/13/26: Fixed depth of Vengeance boxes for additional cards

boardgame

boardgame accessories

boardgameorganizer

Comment & Rating (46)

@jesperk

Great design but boxes for Vengeance are too shallow to fit all cards (sleeved). Using Gamegenic Standard American (59x91 mm) sleeves and they fit nicely but stack too high to fit, since Vengeance has more cards than the original game.

The designer has replied

@PandaruExpress

Ahh shoot. You're right. I don't have vengeance, I got the dims from someone else who requested it. Do you have an overall depth for the vengeance stack in mm? I can adjust it.

@jesperk

Replying to @PandaruExpress :

My total stack measures 73 mm. My guesstimation is the box needs to be at least 43/44 mm tall.

@PandaruExpress

Replying to @jesperk :

OK fixed, see if it works out for you. If you used the looser lid, I didn't change the depth, just the regular lid and base boxes.

@push2flush

i love the box styles! can you make one for uno?

The designer has replied

@PandaruExpress

Hi, potentially yes? But there are so many versions of Uno. Is there like a single official one that's the most common? And it works best if the manual has a nice clean graphic on the front.... does it?

@push2flush

Replying to @PandaruExpress :

the manual wouldn't be great for it, but maybe using the back of the card to trace the logo? the black card with the red and yellow logo is probably the most common

@PandaruExpress

Replying to @push2flush :

I could, but the main benefit of this design is the ability to show off the game's artwork (specifically on the cover) without having to deal with multicolor prints etc! .... Also I don't own a copy of uno ;) Let me think on it a bit...

@RobustPorter

Boosted

Great design! If possible to update to hold Gamegenic Standard American Prime (59 x 91), that would be awesome

The designer has replied

@PandaruExpress

This has been updated, sorry for the delay!

@RobustPorter

Boosted

still about 2mm short on the card height

@PandaruExpress

Replying to @RobustPorter :

Sorry for the delay, I didn't see any comment replies. Added an XL version for longer sleeves.

@rbingle

need a version that holds both games (separately)

The designer has replied

@PandaruExpress

What do you mean? The bases are the same, there are separate lids for each version.

@rbingle

Replying to @PandaruExpress :

sorry for not being clear - a single “double size” box for holding both versions at once

@PandaruExpress

Replying to @rbingle :

Added a bigger box that holds both games, update the print profile and take a look.

@CmdrSchwegs

Print Profile

0.2mm layer, 3 walls, 30% infill

5 stars for the awesome design alone. However, the original is definitely too small of a lid to fit, and, the looser lid easily falls off. Maybe it's not possible to avoid it with 3D printing, idk. I printed with Inslogic Pla Pro on a P1S.

The profile uploader has replied

@PandaruExpress

Thanks for the feedback, can you shoot me a chat and a photo of the small one? It should be snug but definitely should fit with a bit of friction, esp on P1S which is what I'm using. I made the looser one for other printers that have more elephant footing etc.

@CmdrSchwegs

Replying to @PandaruExpress :

Happy to share with you. But I have to reach level 7 before I can send you a chat :(. Are you able to send me one to bypass that restriction?

@skillazis

New version has smaller size cards and are too loose in this box. new dimensions are 59 x 91

The designer has replied

@PandaruExpress

My cards are 56x89. This is designed for sleeved cards only and for penny sleeves, which run big. If you go unsleeved there will be room but my game didn't fit in the original box with any kind of sleeves anyway.

@Dile

Just what I was looking for. Love the minimalist design. I purchased Dragon Shield American Standard for board games. Dimensions: 57 x 89 mm. I did need to adjust the width to make up for the longer sleeves. If anyone shows interests I can add the remix. All credit to the original designer.

The designer has replied

@PandaruExpress

Thanks for the review! FYI on 7/17 I did update the files to allow for penny sleeves (which should be bigger and wider than the sleeves you mentioned). Did you use the updated profile/files or the original?

@user_558446222

Would love to have access to the remix. The updated file does not quite fit my sleeved cards...

@PandaruExpress

Replying to @user_558446222 :

Sorry for the delay, I didn't see any comment replies. Added an XL version for longer sleeves.

@user_3604929900

Print Profile

0.2mm layer, 3 walls, 30% infill

I love this design. Looks great and being able to store sleeved cards is awesome.

The profile uploader has replied

@PandaruExpress

Thanks, glad you like it!

@push2flush

the design is amazing! please make ones for any card games I have and the ones i'll get in the future hehe

@user_837861242

Hey, could you possibly do a 'flip 7 with a vengeance manual cover? I believe everything is the same dimensions except the title cutout is different.

The designer has replied

@PandaruExpress

Probably, but i would need a scan of the book along with the exact dimensions in MM. If you can provide that, feel free to send me a chat and I can set this up

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Card Shuffler

Josh-3D

50.6 k

24.9 k

Flip7 + With A Vengeance - Organizer Insert

RED

Rugged Pokemon Card Box (for cards with sleeve)

Angelius

2 k

824

"Duality" | Deck Box | 60+ sleeved cards

Filament Owl

3 k

864