Orcal (Stellar Blade) Hueforge
Print Profile(1)
Description
A Hueforge sheet of Orcal, a character from Stellar Blade.
Description of Hueforge:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Orange
At layer #15 (1.28mm) swap to Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.
(SHOULD BE PRINTED WITH 0,2mm NOZZLE FOR THE BEST QUALITY)
I hope you like it!
PS: please, if you want to sell this model send me a message and I'll tell you the requirements (it's simple). Thanks.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)