Primitive Orc Hammer COS Big Hammer Children's Toy Safe Simulation Weapon Model Comic Con Prop Optimized Support Beginner Friendly One-Click Printing

 Welcome to download, print, and comment. Upload photos of your printed results for reference. If you like it, thank you for your boost.

1.Most uploaded models are support-free or support-optimized. Beginner-friendly; one-touch printing via mobile device.
If supports are present, carefully remove them using model pliers. For assembly, use super glue.

2.All images shown are real photographs I took after successfully printing the model.
For more detailed photographs of the model, scroll down from the main image and click to enlarge for a closer look.

3.Visit my profile page for more models to download.

A 0.4 nozzle is recommended. Layer heights of 0.2 or 0.16 are also suitable.
For even better results, use a smaller nozzle and lower layer height.
Avoid modifying print settings whenever possible; one-touch printing via mobile device is recommended.

4.The most common reason for printing failures for beginners is poor first layer adhesion. It is recommended to wash the print bed with dish soap before printing.

5.Thank you for downloading, printing, and boosting, but commercial use is prohibited.

Thank you for boosting! Your support earns me points to exchange for filament, allowing me to design and print more models for everyone to download.

6.You may not share, sublicense, sell, rent, host, transfer, or distribute in any way the digital or 3D-printed version of this work, or any derivative works of this work in any other digital or physical format (including, but not limited to, derivative creations of this item, and hosting on other digital platforms). No fees may be charged for the use of these items in any way without permission.

1. Most uploaded models have no supports or optimized supports. Beginner-friendly. One-click printing is available on mobile.

Try not to modify printing parameters. You can directly print with one click on your phone.

If there are supports, use modeling pliers to carefully remove them bit by bit. If you need to assemble, use 502 super glue.

2. The pictures you see are real photos uploaded after I successfully printed them.
For more real details of the model, you can scroll down on the main image and click to enlarge and view the details.

3. Visit my homepage, and you can choose to download more models.


4. The most common reason for print failure among beginners is poor first layer adhesion. It is recommended to wash the build plate with dish soap before printing.


Thank you for your boost. I will try to upload more models for everyone to download.

5. You may not share, sublicense, sell, rent, host, transfer, or distribute the digital or 3D printed version of this work, or any derivative works in any other digital or physical format (including but not limited to secondary creations of the item, and hosting on other digital platforms) in any way. These items may not be used for commercial purposes without permission.